← Back to News
November 21, 2026

CCTV Tender Specifications in Singapore: What to Write and Check

How to write or answer a CCTV tender specification in Singapore: camera, retention, network, analytics and acceptance requirements, with SPF, MOM, IMDA and PUB figures.

CCTV Tender Specifications in Singapore: What to Write and Check

CCTV Tender Specifications in Singapore: What to Write and Check

Security specialist checking CCTV tender requirements

A Singapore CCTV tender specification works when it states the problem first, sets measurable requirements second, and ends with an acceptance test that proves the installed system does the job. The numbers come from the regulator that governs your site: the Singapore Police Force (SPF) for buildings, the Ministry of Manpower (MOM) for construction sites, PUB for water and drainage works, and IMDA for grant-funded analytics. This guide gives integrators, facility owners and security managers the clauses to include, the figures to anchor them to, and the points where bids most often go wrong.

TL;DR

  • Follow the SPF's four stages: define the problem, define requirements, detail technical specifications, then verify fitness for purpose after commissioning.
  • Mark each clause as mandatory or preferred. Bidders price against what you mark, so unmarked clauses become disputes.
  • Anchor image, retention and power clauses to a named Singapore source. Minimums differ by use case: 12 fps for MOM construction sites, 30 fps in IMDA's 2024 call for proposals.
  • Write acceptance tests, uptime limits and cybersecurity evidence into the tender, not into the contract negotiation afterwards.
  • Bidders should answer with a clause-by-clause compliance matrix and document every exception with a reason.

Table of Contents

How Singapore CCTV specifications are structured

There is no single national CCTV tender template. Instead, several official documents set the baseline, and your tender picks the ones that apply.

The SPF's VSS Standard for Buildings (March 2022) frames specification as four stages: define the problem, define requirements, detail technical specifications, then verify after installation and commissioning that the system is fit for purpose. That sequence is a good skeleton for any tender document. Most weak specifications skip the first stage and jump straight to camera counts and resolutions, which leaves bidders guessing what the cameras are supposed to achieve.

IMDA's May 2024 call for proposals on video analytics and surveillance shows a public-sector format. Requirements are marked mandatory or preferred and cover video management, analytics, camera quality, storage, network security, access control and PDPA-related features. Submissions are ranked on criteria including financial soundness, track record, cost-effectiveness, and ease of use and implementation. Copying that two-tier marking into a private tender gives bidders a clear line between what disqualifies them and what scores points.

Pick the governing source early:

Site typeMain referenceWhat it sets
Commercial and residential buildingsSPF VSS Standard (2022)Camera type, placement, ONVIF, bandwidth, UPS
Construction sites of S$5 million and aboveMOM VSS FAQsResolution, frame rate, retention, export
Earth control and drainage sitesPUB Earth Control Measures GuidebookUptime, alerts, snapshot supply
Analytics and grant-funded projectsIMDA call for proposals; TR 69:2019Analytics modules, security, PDPA features

Define scope and outcomes before hardware

State the area of coverage, operating hours, the security outcomes you want and how each will be measured. The Civil Service Club's Guide on Outcome-Based Security Contracts tells buyers to set these out, along with additional obligations such as training, audits, safety management and equipment specifications.

Two more points from that guide matter for CCTV. First, it recommends contract durations of at least three years for contracts under S$1 million annual value, and at least five years (or a three-year firm term plus a two-year option) above that. Longer terms lower amortised technology costs. Second, it warns that overly stringent demands push costs up unnecessarily, so service levels should be reasonable and achievable. A tender asking for 100% detection in all weather will either draw padded prices or no serious bids.

Turn outcomes into testable statements. "Detect a person crossing the north fence line after 10 pm and alert the control room" can be tested at handover. "Provide robust perimeter security" cannot.

Camera, coverage and placement requirements

The SPF standard recommends multiple colour cameras of at least HD 1080p with true wide dynamic range (WDR) for comprehensive coverage of common areas. WDR keeps faces and plates readable when bright and dark areas share a frame, such as a lobby entrance in afternoon sun. Static cameras should sit where they cannot easily be evaded, damaged or obscured.

Tender for CCTV Supply & Installation I What are the requirements for CCTV installation? CCTV Tender

For construction sites, MOM's VSS FAQs set a floor of colour recording at HD 1080 (1920×1080 pixels or equivalent) and at least 12 frames per second. Footage must be exportable in *.avi, *.mp4 or an equivalent format, carry a date stamp, time stamp and camera identification code, and not have overlays that materially obstruct the image. Night vision is required where work happens at night or in low light.

The IMDA call for proposals is stricter: its mandatory items include 1080p colour cameras at a minimum of 30 frames per second. The gap between 12 and 30 fps is the clearest example of why a tender must name its governing source rather than say "HD CCTV".

The WSH Guide on Video Surveillance Systems (2024), published through the Tripartite Alliance, adds practical detail worth lifting into a spec:

  • Dome or bullet cameras, with pan/tilt/zoom optional.
  • Weather- and dust-proof housings.
  • Mounting at high vantage points with an unobstructed line of sight.
  • Physical barriers or virtual privacy zones to limit recording of neighbouring premises.
  • Non-flammable battery packs or solar power where mains power is unavailable.

The same guide says body-worn or helmet-mounted cameras should supplement fixed cameras, not replace them, because their view depends on where the worker faces and their batteries are unlikely to last a full day.

Site-specific agencies go further. PUB's Annex 2 CCTV requirements require the camera to clearly show the discharge outlet and the upstream drain cross-section, with a colour image that distinguishes clear from muddy flow. A Blue-Marker of at least 100×100 pixels must be visible when there is no discharge, lit by white LED lighting so it shows at all times. This is the model to follow: say what must be visible in the frame, and how many pixels prove it.

Analytics requirements

If the tender includes video analytics, write the use cases, not the product category. The SPF standard describes rule-based alerts for virtual tripwire intrusions, loitering in prohibited areas, unattended objects and emergencies, and points owners to Singapore Standards Technical Reference TR 69:2019 for deployment. TR 69 is a provisional standard covering video analytics reference architecture, interoperability, selection, installation and benchmarking, intended for suppliers, buyers, integrators and end users. It references ISO/IEC 62676-5:2018 for camera image quality and SS ISO/IEC 27001:2019 for information security.

The working group behind TR 69 notes that video analytics lacks a common language for describing requirements, which creates expectation gaps between buyer and supplier. Close that gap in the tender with four items for each analytic:

  1. The event to detect, in plain words.
  2. The camera view and lighting in which it must work.
  3. The accuracy measure and the test footage or live pilot used to confirm it.
  4. Where the alert goes and who acts on it.

IMDA's call marks analytics modules as mandatory, including intrusion, threat and loitering detection, and dashboards with cross-filtering. Facial recognition features in that call come with blacklisted-individual and unsupervised-child alerts, so check your PDPA position before copying them. For an example of how a live pilot can be written into a procurement, see our note on intrusion detection analytics in Singapore procurement.

Network, power and resilience

The SPF standard calls for ONVIF-compliant IP systems, so cameras, recorders and video management software from different makers can work together. ONVIF is an industry interoperability specification. It asks for bandwidth sized for the maximum concurrent recording, display and analytics feeds, a UPS with at least 30 minutes' backup for the VMS, NVR and viewing terminals, and suggests considering automatic failover that protects against data loss during the switch.

Write these into the tender as numbers: streams per switch uplink, headroom percentage, UPS runtime at full load. For communications redundancy options, our guide to dual path and warm standby CCTV comms lays out the choices, and surge protection for CCTV covers the power-quality side that often gets left out of specifications.

PUB's Earth Control Measures Guidebook shows how an agency turns resilience into an enforceable clause. The site CCTV must run on an all-day power supply, operate at all times with no more than 4% downtime per month, send an automatic email alert if it is not operating, and supply at least 15 days of 5-minute snapshots within 2 days of a PUB request. Uptime, alerting and a response time for evidence are three clauses any tender can borrow.

Network, power and resilience

Retention, access control and privacy

MOM requires construction-site footage to be stored for at least 30 days from the date of recording, and at least 180 days where a reportable incident has occurred, with safeguards preventing deletion or overwriting. Streaming for monitoring is not mandatory, though periodic footage review is recommended. IMDA's mandatory items ask for storage of footage from at least 12 hours of daily operation for a minimum of 30 days, local or cloud.

Build the retention clause around three questions: how long routine footage is kept, what extends that period, and who can export or delete. Our guides on CCTV data retention rules and video redaction before auto-overwrite explain how to set those rules so evidence is preserved and third-party faces are handled properly.

IMDA's call also lists PDPA-related features as mandatory: retention-period flags, and encryption in transit (TLS) and at rest. It requires SSL or other encrypted communication between cameras and the video gateway, plus access control and authentication with multi-factor authentication and role-based access, firewalls, VPN and automated off-site backup. Even outside grant projects, these make a sound cybersecurity checklist for any IP surveillance tender.

Cybersecurity and acceptance testing

Cybersecurity is now a procurement filter. In the CSA's Committee of Supply 2026 speech, Senior Minister of State Tan Kiat How announced that GovTech will require government vendors managing critical systems and sensitive government data to meet Cyber Trust Mark requirements. CSA will likewise require Critical Information Infrastructure owners, their auditors and licensed cybersecurity service providers to meet them. If your client is a government agency or a critical infrastructure owner, ask bidders in the tender what certifications and test evidence they hold.

Then define acceptance. The SPF's fourth stage is verification after installation, so the tender should list what will be tested at handover:

  • Every camera's field of view against the approved drawings.
  • Image quality at the lowest expected light level.
  • Recording, retrieval and export of a sample period.
  • Failover and UPS runtime under load.
  • Alerting, including the not-in-operation email where required.
  • Analytics performance against the agreed accuracy measure.

For ongoing performance, specify maintenance in the same tender. Our preventive maintenance guide for CCTV in Singapore lists the routine checks worth including in a term contract.

How bidders should respond

The winning response is usually the easiest to evaluate. Build a compliance matrix with one row per tender clause, a status (complies, partially complies, exception), the page in your proposal that proves it, and a short note.

Three patterns from recent Singapore tenders are worth planning for:

  • Eligibility conditions. A PSA tender for video analytics to detect unsafe behaviour (October 2024) asked for a system preferably linked to Milestone VMS, required tenderers to be the analytics solution provider or its appointed distributor, and asked for at least BizSafe 3 certification and compliance with regulatory requirements, including foreign workers' work permit conditions. Check authorisation letters and certifications before writing a line of the technical response.
  • Live demonstrations and pilots. The Straits Times reported in October 2024 that LTA's bus-camera tender required shortlisted companies to demonstrate live and, if selected, complete a four-month proof-of-concept test. Budget for demonstration kit and field engineers early.
  • Strict submission formats. PUB's Sewer CCTV Guidebook (October 2023) requires video in MP4 at a minimum of 640×480, a 3GB maximum submission size, no MP4V or XVID codecs, and defect classification under the WRc/WAA manual, 5th edition. Non-compliant submissions are rejected. A good bid is lost on format as easily as on price.

Document every exception with a reason and an equivalent. "Complies with 1080p at 25 fps, with the 30 fps clause met on the entrance cameras" is clearer than silence, and evaluators can score it.

Where multi-vendor projects need a coordinator

A tender that names ONVIF, analytics, dashboards, cybersecurity evidence and local validation often involves several vendors. BeyondSensor works with system integrators, regional partners and government agencies on exactly this: multi-vendor technology integration and localized technical validation across Southeast Asia. If your specification spans cameras, analytics, visitor management and a unified operations view, our Solution Integration service is where to start, and Ecosystem Matchmaking helps match the right technology to a requirement before you write the clause.

Promo: from specification to deployment

BeyondSensor offers AI-powered surveillance software, video analytics dashboards, virtual guard tour systems and automated visitor management, with the BeyondWatch, BeyondPatrol, BeyondSecure and BeyondVisitor product lines, plus technical deployment planning tools. If you are drafting or answering a CCTV tender in Singapore, tell us the site type and the outcomes you need, and we will help you shape the technical response.

Beyondsensor

Start at beyondsensor.com or use our Ask Beyond page to describe your project.

Perspective: specify outcomes, then prove them

We read many tender documents, and the strongest share one habit: they say what the system must achieve before they say what it must contain. That is the SPF's own sequence, and we think it is the right one.

Our approach to surveillance is built around exception-based monitoring. Operators should not stare at walls of video; the system should surface what needs a decision. A tender can ask for that directly by writing analytics use cases, alert routes and response expectations as testable clauses.

We also believe in unified operations. When cameras, patrol, visitor and analytics data land in one dashboard, the acceptance test gets simpler, because there is one place to check each requirement. That is why we design our platforms for multi-vendor integration and validate them locally for Singapore and the region.

Specify what you need to see, how long you must keep it, how it is protected, and how you will verify it. Everything else follows.

Eumir

FAQ

What is the minimum camera resolution in a Singapore CCTV tender?

There is no single figure. The SPF VSS Standard recommends HD 1080p colour cameras with true WDR for building common areas. MOM's construction-site rules require at least HD 1080 and 12 frames per second, while IMDA's 2024 call for proposals sets 1080p at a minimum of 30 frames per second. State which source governs your site.

How long must CCTV footage be kept?

For MOM-regulated construction sites, footage must be stored at least 30 days from recording, and at least 180 days where a reportable incident has occurred. IMDA's 2024 call also asks for at least 30 days of storage. Other sites should set retention from their own risk and PDPA position.

Do all CCTV tenders in Singapore require the same standard?

No. Buildings follow the SPF VSS Standard, construction sites of S$5 million and above follow MOM's VSS requirements (effective 1 June 2024), and agencies such as PUB add site-specific clauses. Grant-funded analytics projects follow the relevant IMDA call.

What should a bidder include with a CCTV tender response?

A clause-by-clause compliance matrix, evidence for mandatory items, authorisation and certification documents, and a stated reason for any exception. Check format rules too, since some agencies reject non-compliant submissions outright.

Why include acceptance tests in the tender itself?

Because the SPF's process ends with verifying that the installed system is fit for purpose. If tests are written into the tender, every bidder prices the same work, and the owner has a clear basis for handover.

Sources

Recommended

Share this article:
Get In Touch

Let's Build YourSecurity Ecosystem.

Whether you're a System Integrator, Solution Provider, or an End-User looking for trusted advisory, our team is ready to help you navigate the BeyondSensor landscape.

Direct Advisory

Connect with our regional experts for tailored solutioning.